Fork me on GitHub

Out of Marbles, Marble Machine

Mike Thomas
Mike Thomas
Created , last modified
Out of MarblesToys
Cover Image for Out of Marbles, Marble Machine

Table of contents

  1. Intro
  2. Bucket Lift
    1. Sourcing Parts
    2. Printing Parts
  3. Triple Twister Module
    1. Printing Parts
  4. Circular Marble Tray

Intro

Printing an Out of Marbles Marble Machine desk toy.

Bucket Lift

Electronics installed into the base of the marble machine

Sourcing Parts

ItemQuantityReceivedNotes
7.144mm Marbles5050
N20 DC 3V, 15 RPM Motor11
Battery holder11
Metal On/Off Switch11
Super Glue11

Note

All parts were sourced from the Official Motorized Hardware Kit.

Printing Parts

Installing the Chain, Marble Buckets and Gears

ItemQuantityMaterialTimeSizeWeightCostPrintedNotes
Axle1Ziro PLA (Yellow)25m0.68m2.02g£0.04✔️Version 1.1
Base1Ziro PLA (Black)20h33m91.55m273.05g£4.37✔️Version 1.1
Battery Cover Base1Ziro PLA (Black)39m1.84m5.48g£0.09✔️Version 1.1
Chain Marble Bucket8Ziro PLA (Yellow)50m1.99m5.93g£0.11✔️Version 1.1
Gear Idle1Ziro PLA (Yellow)51m1.84m5.49g£0.10✔️Version 1.1
Gear Motor1Ziro PLA (Yellow)44m1.62m4.84g£0.09✔️Version 1.1
Logo1Ziro PLA (Yellow)30m1.20m3.58g£0.06✔️Version 1.1
Offloading Ramp1Ziro PLA (Black)1h17m2.99m8.91g£0.14✔️Version 1.1

Triple Twister Module

The Out of Marbles, marble machine fully assembled

Printing Parts

ItemQuantityMaterialTimeSizeWeightCostPrintedNotes
Base1Ziro PLA (Black)5h24m18.47m55.08g£0.88✔️Version 1.0
Top1Ziro PLA (Yellow)3h29m12.27m36.59g£0.66✔️Version 1.0
Triple Twister1Ziro PLA (Yellow)9h49m32.48m96.86g£1.74✔️Version 1.0

Circular Marble Tray

ItemQuantityMaterialTimeSizeWeightCostPrintedNotes
Marble_Tray1Ziro PLA (Black)❌
Marble_Tray_Lid1Ziro PLA (Black)❌

Tip

Coloured Text can be achieved by making a Filament Change (M600) at layer 7.

Elsewhere
External Links