Assembling the Voron StealthBurner Toolhead
Mike Thomas
Created , last modified
ExtruderVoron
Image © 2023 Voron Design
Table of contents
Sourcing Parts
Fasteners
| Item | Quantity | Received | Notes |
|---|---|---|---|
| Mounting screws for hotend (M2.5 / M3) | 2-4 | Not required for V6 Toolhead | |
| M3x8 SHCS | 2 | 2 | In LDO Voron V2.4 Premium Hardware Kit |
| M3x6 FHCS | 3 | 51 | |
| M3x6 BHCS | 1 | 1 | In LDO Voron V2.4 Premium Hardware Kit |
| M3x50 SHCS | 2 | 50 | |
| M3x30 SHCS | 1 | 1 | In LDO Voron V2.4 Premium Hardware Kit |
| M3x25 SHCS | 6 | 30 | |
| M3x20 SHCS | 1 | 1 | In LDO Voron V2.4 Premium Hardware Kit |
| M3x16 SHCS | 2 | 2 | In LDO Voron V2.4 Premium Hardware Kit |
| M3x12 SHCS | 2 | 2 | In LDO Voron V2.4 Premium Hardware Kit |
| M3x10 SHCS | 2 | 2 | |
| M3 Washer | 1 | 1 | In LDO Voron V2.4 Premium Hardware Kit |
| M3 Threaded Insert | 19 | 19 | In LDO Voron V2.4 Premium Hardware Kit |
| M3 Hexnut | 2 | 2 | In LDO Voron V2.4 Premium Hardware Kit |
| Bondtech BMG Extruder Kit | 1 | 1 |
Misc
| Misc | Quantity | Received | Notes |
|---|---|---|---|
| PTFE Tube 50mm (Trim to length) | 1 | 1 | |
| 6x3mm Magnet (Hall Effect Endstop) | 1 | Not required as I will be using physical switches |
Electronics
| Item | Quantity | Received | Notes |
|---|---|---|---|
| NeoPixel RGBW Mini Button PCB | 3 | 3 | Linneo Rainbow Barf LED Harness |
| NEMA14 36mm pancake Motor with 10 tooth gear | 1 | 1 | LDO-36STH20-1004AHG |
| 50x50x15 Centrifugal Fan | 1 | 1 | GDSTime Fan |
| 40x40x10 Axial Fan | 1 | 1 | GDSTime Fan |
Cables
| Item | Quantity | Received | Notes |
|---|---|---|---|
| MicroFit3 Male Pin | 3 | Not required as I will be using LDO Toolhead PCB | |
| MicroFit3 Female Pin | 3 | Not required as I will be using LDO Toolhead PCB | |
| MicroFit3 Connector Receptacle 3 Position | 1 | Not required as I will be using LDO Toolhead PCB | |
| MicroFit3 Connector Plug 3 Position | 1 | Not required as I will be using LDO Toolhead PCB | |
| 30AWG PTFE Cable (3ft total) | 1 | Not required as I will be using LDO Toolhead Cable | |
| 24AWG PTFE Cable (30ft total) | 1 | Not required as I will be using LDO Toolhead Cable |
ADXL345 Sensor
| Item | Quantity | Received | Notes |
|---|---|---|---|
| M3x12 SHCS | 2 | 2 | in LDO Input Shaper Kit |
| M3 Threaded Insert | 2 | 2 | in LDO Input Shaper Kit |
| M2x10 Self-Tapping Screw | 2 | 2 | in LDO Input Shaper Kit |
| Harness for ADXL Sensor | 1 | 1 | in LDO Input Shaper Kit |
| ADXL345 Sensor Module | 1 | 1 | in LDO Input Shaper Kit |
Printing Parts
Image © 2023 Voron Design
All printed parts will be printed in eSun ABS+. The Voron team recommends an infill type of 40% of either Grid, Gyroid, Honeycomb, Triangle or Cubic. A layer height of 0.2mm and extrusion width of 0.4mm, with a wall count of 4 and top/bottom layers of 5.
Tools
| Item | Quantity | Material | Printed | Notes |
|---|---|---|---|---|
| LED-PCB_Drill_Template | 1 | ❌ | This is a mod by hartk1213 | |
| SB_5015_Cutting_Tool_A | 1 | ❌ | ||
| SB_5015_Cutting_Tool_B | 1 | ❌ |
ClockWork 2
Image © 2023 Voron Design
❎ Guidler Arm
| Item | Quantity | Material | Size | Weight | Cost | Printed | Notes |
|---|---|---|---|---|---|---|---|
| guidler_a | 1 | eSun ABS+ (Purple) | ❌ | ||||
| guidler_b | 1 | eSun ABS+ (Purple) | ❌ | ||||
| latch_shuttle | 1 | eSun ABS+ (Purple) | ❌ |
❎ Motor Plate
| Item | Quantity | Material | Size | Weight | Cost | Printed | Notes |
|---|---|---|---|---|---|---|---|
| motor_plate | 1 | eSun ABS+ (Black) | ❌ |
❎ Main Body
| Item | Quantity | Material | Size | Weight | Cost | Printed | Notes |
|---|---|---|---|---|---|---|---|
| main_body | 1 | eSun ABS+ (Black) | ❌ |
❎ Latch
| Item | Quantity | Material | Size | Weight | Cost | Printed | Notes |
|---|---|---|---|---|---|---|---|
| latch | 1 | eSun ABS+ (Purple) | ❌ |
❎ Chain Anchor
| Item | Quantity | Material | Size | Weight | Cost | Printed | Notes |
|---|---|---|---|---|---|---|---|
| chain_anchor | 1 | eSun ABS+ (Black) | ❌ | 3Hole Version |
❎ Cable Cover
| Item | Quantity | Material | Size | Weight | Cost | Printed | Notes |
|---|---|---|---|---|---|---|---|
| pcb_spacer | 1 | eSun ABS+ (Purple) | ❌ | ||||
| cable_door | 1 | eSun ABS+ (Black) | ❌ | For PCB |
Tool Cartridge
Image © 2023 Voron Design
❎ V6 Toolhead
| Item | Quantity | Material | Printed | Notes |
|---|---|---|---|---|
| printhead_v6_r6_front | 1 | eSun ABS+ (Black) | ❌ | |
| printhead_v6_r6_rear_cw1 | 1 | eSun ABS+ (Black) | ❌ | Clockwork 1 version |
| printhead_v6_r6_rear_cw2 | 1 | eSun ABS+ (Black) | ❌ | Clockwork 2 version |
StealthBurner
Image © 2023 Voron Design
❎ StealthBurner
| Item | Quantity | Material | Printed | Notes |
|---|---|---|---|---|
| main_body | 1 | eSun ABS+ (Purple) | ❌ |
❎ LEDs
| Item | Quantity | Material | Printed | Notes |
|---|---|---|---|---|
| stealthburner_LED_diffuser-beta3 | 1 | BasicFil PETG (Clear) | ❌ | Rainbow Barf LED Version, Not required as I have a Resin Printed one. |
| led_carrier_rev2 | 1 | eSun ABS+ (Black) | ❌ | Rainbow Barf LED Version |
ADXL345 Mount
Image © 2023 Voron Design
❎ ADXL345 Mount
| Item | Quantity | Material | Printed | Notes |
|---|---|---|---|---|
| adxl_mount | 1 | eSun ABS+ (Black) | ❌ | For LDO Input Shaper Kit |
| adxl_washer | 2 | eSun ABS+ (Black) | ❌ |
X Carriage
Image © 2023 Voron Design
The parts required to mount the StealthBurner on Voron 2.4 can be found here.